Asus Eee PC 1201PN + Ubuntu 10.04 Netbook edition – review

I’ve finally upgraded from my old Eee PC 900, which was, quite frankly, getting a bit old. I went with the 1201PN primarily for the larger screen. I would have preferred something with a more powerful “conventional” processor, but there just wasn’t anything in my price range suitable. The 1201PN cost me $699 from Myer (I had vouchers) in early June 2010.

The basic specs for the 1201PN are as follows:

  • Intel Atom N450 CPU
  • Nvidia Ion2 graphics
  • 12.1″, 1366*768 gloss screen
  • 2 gig of ram
  • 320 gig 5400rpm hard drive
  • wifi, bluetooth, card reader, hdmi + vga port etc

It came “pre-installed” with Windows 7 Home Premium. The reason for the quotes is that upon first power-up, it had to go through a “configuration” step, which took approximately 20 minutes, several reboots, and resulted in the system hanging, forcing me to power cycle it. I mean, is it that hard to get things working? Not having installed windows since the early XP days (eight years ago or so) I kind of thought things might have improved a bit. Good to see my hatred of windows has not become unfounded.

Anyway, the only reason I even noticed this was I decided to power it up to play while waiting around at the shops before I could go home. Upon getting home, i immediately downloaded the latest Ubuntu. Using usb-creator i created a bootable USB drive. Getting the 1201PN to boot off the USB drive took a bit of fiddling. Some combination of pressing tab, f2 and delete just after power-on displayed the POST screen and allowed me to choose to boot from USB. Note that even after changing the boot order, I still needed to bring up a boot device selection box, as it would not boot straight from the USB device.

Installation of Ubuntu was, as usual, very quick and easy (a lot easier than configuring Windows 7!)

Out of the box things worked pretty well. Wifi, bluetooth, sound, microphone, screen brightness via function keys (fn-f5 and fn-f6) etc.

There are still a number of things that aren’t working:

  • Volume function keys. These don’t work, nor do they show up in xev, so I’m not sure where to from here
  • Screen brightness on resume. resumes to minimum backlight brightness
  • No on screen display (OSD) for any hotkey functions
  • Wifi hotkey – doesn’t turn on/off wifi
  • multitouch. doesn’t seem to work except in a software emulated mode. It is touted as a multi-touch device, and in windows functioned ok (two finger vert/horizontal scroll, zoom in/out, rotate), however i think it might have been software driven. Ubuntu mouse properties allow you to use the zone based vertical scroll, but this really does suck.
  • battery life. Indicated as around 5 hours by power meter. Not sure if perhaps ubuntu isn’t fully using the power saving features of the CPU/chipset. will have to investigate further.

The touchpad is probably the most irritating issue at this point. Doing some investigating, /proc/bus/input/devices lists the touchpad thus:

I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics Touchpad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: EV=b
B: KEY=420 0 70000 0 0 0 0 0 0 0 0
B: ABS=11000003

I haven’t looked into the touchpad issue too much, but will hopefully have it resolved and two finger scrolling happening soon.

Overall, Ubuntu works pretty well out of the box. A few minor issues, which hopefully I will sort out in time. I’ll post any updates here as they happen.

UPDATE1:

I have now got volume control function keys working. It seems that the Asus BIOS is a bit stupid in that it will change how it behaves based upon the OS which it is running. Therefore, you need to tell it you’re running linux to get it to send the right keycodes. Instructions came from here, but to summarise, you need to edit /etc/default/grub and add acpi_osi=Linux to the parameter¬†GRUB_CMDLINE_LINUX_DEFAULT. After you’ve done that, update the grub configuration (sudo update-grub), reboot and volume hotkeys (with OSD) should function.

UPDATE 2:

HD flash video (vimeo, youtube HD etc) doesn’t work under linux, whereas it does under windows. I did some investigation after a query from kajdo, and it looks like the issue is with the flash plugin, not the video driver. I installed the restricted nvidia binary driver (using jockey-gtk), and get good 3D performance in games. Doing some reading, it seems that HD flash video is a feature of the Flash 10.1 plugin for windows – it enables use of the ion acceleration features.

So, basically i think we’re going to have to wait for 3D acceleration support in our flash plugins before we’ll be able to watch HD flash video, damnit.

6 comments

  1. thx to adobe we got hardware acceleration with flash player 10.2 … currently trying out youtube 1080p vids with my eeepc 1210pn and everything is working out pretty well …

    best from austria (using ubuntu 10.10 w/flash player 10.2)
    kajdo

  2. Thank you for the “acpi_osi=Linux” hint. This solved most of my function key issues. Is there a possibilty to enable the Fn+F8 key to switch to a beamer? this would be very useful …

    The flash-player issue is annoying, as flash seems to be everywhere. I don’t have a TV and I want to use a free TV stream provider, but they use a flash player…

  3. Hi,

    could you tell me which nvidia driver you are using? … looks like my 1201pn doesn’t use the ion chip at all (f.e. watching the hd trailer of avatar in 1080p on youtube works on windows, but about 2fps on ubuntu 10.04).

    if you could post a description how to get those things workig would be great.

    • Looking into this, a thought has occurred to me – it might be the flash plugin that is the problem, not the video driver. I used the recommended restricted driver (run ‘jockey-gtk’ from a terminal to search for and install drivers). With this driver I can play 3d games fairly well – Supertuxkart @ 1368×766 full screen has no lag issues. Doing a bit of reading around flash HD content, it seems that it is a feature of Adobe’s new flash version (10.1).

      So, my guess is that 3D acceleration is working fine, but the flash plugin doesn’t take advantage of it.

      Phil

Leave a Reply

Your email address will not be published. Required fields are marked *